Chibi Gamer Koala Headphones | 3D Print, Support-Free

Cute chibi gamer koala figurine wearing oversized headphones, designed as a one-piece, support-free 3D print. Perfect as a desk buddy, shelf decor, or a gift for gamers and animal lovers.

Optimized for FDM: rounded forms, gentle angles under 45°, and a flat, stable base so it prints cleanly without supports. Scales nicely from 70–120 mm tall.

Highlights:

- One-piece, watertight model

- Support-free FDM friendly geometry

- Flat base for stability

- Headphone band and controller are fused and thickened

- Works great with a 0.4 mm nozzle

Printing tips: Use PLA with 0.16–0.20 mm layers, 12–18% infill, 2–3 perimeters, and 5 top/bottom layers. Orient the flat base on the bed. Add a light brim if your adhesion is marginal. Place the Z-seam at the back for a cleaner face.

Finishing: Light sanding or a quick filler/primer makes the surface pop. Optional filament color swaps at the headphone band or controller add a fun accent. No assembly required.

Estimated print time: 2.5–4.5 h at 100 mm tall with 0.2 mm layers.